Tumo Int Corporation Ltd
Tumo-Int 51.2V 100Ah 5kWh Lithuim LiFePO4 Power Wall with BMS 7000 Life Cycles (UL Listed)
Tumo-Int 51.2V 100Ah 5kWh Lithuim LiFePO4 Power Wall with BMS 7000 Life Cycles (UL Listed)
- 【Our advantages】Simple and fashionable appearance,Wall-mounted, convenient installation,With communication function (RS232+CAN double RS485) and Display screen,, with continuous flow of 100A protection plate and copper bar.
- 【Built-In BMS & Convenience & Maintenance Free】: Tumo-Int LiFePO4 battery has built-in BMS (Battery Management System) to protect it from overcharge, over-discharge, over-current, and short circuit with excellent self-discharge rate. Built-in high temp cut off prevents charging over 122 °F (50 °C). Plus, Li-Ion batteries can be safer than Lead Acid batteries, which have no protection against ground faults.
- 【Lithium Iron Technology】: CHINS deep cycle lithium-ion battery has higher energy density, more stable performance and greater power. It can support fast charging and solar panel charging. environmentally friendly.
- 【10 Years lifetime】Tumo-Int Time LiFePO4 battery provides 3500~8000, which is more than 10 times to Lead Acid with 200~500 cycles. Ampere Time LiFePO4 battery has a 10-year service life, three times longer than the Lead Acid’s 3-year .
- 【Widely Used】: Home energy storage system, UPS backup, lighting, digital/CCTV cameras, portable TV, e-Robot, electric vehicles, DIY loud speaker, 12V router, air pump, fish finder, golf car, trolling motor, motor home/RV & camper, Houseboat, Travel Trailer, Dump Trailer and more.
Product Description
BMS design for 15 series lithium iron phosphate battery pack
.With 100A continuous over-current capability, with communication function (RS232+CAN and dual RS485 communication), overcharge protection function, over discharge protection function, over current protection function, short circuit protection function, equalization function, alarm function
Battery Specifications
- Combination method :15S
- Rated Capacity:100Ah
- Nominal Voltage:51.2V
- Charging Voltage:54.75V
- Charge time : Approx6 h
- Maximum Continuous Charge Current:100Ah
- Maximum Continuous Discharge Current:100Ah
- Dimensions:555*390*150mm
- Weight:≥ 81.5lbs
- Operation Temperature Range:Charge: 0~45℃ | Discharge: -20~60℃
- Cycle life:≥7000n times
The battery's proprietary lithium-iron phosphate chemistry takes the hassle out of maintaining and utilizing the power you need. Batteries are meant to be used when you need them and if you need them all the time then lead-acid becomes too unreliable and exhausting to keep track of. The lithium chemistry of the battery cuts the weight of the traditional lead-acid battery to less than half while providing a massive boost to performance and capacity so you won't miss a single second of runtime. Designed for more than just storing power easily, they're here for you to provide long-lasting peace of mind with their immense durability making it easy to use them in your home, at your job, or for your outdoor needs where trust, safety, and the environment matter most.
Product advantages
|
|
|
---|---|---|
Materials & ProtectionModern fashion and simple design. A steel-hardened, gray cast iron case provides significant improvements in protection against structural affects versus a typical plastic case that can have its integrity and functionality compromised by excessive heat and mechanical shock during a typical service-life. |
New technology developmentWith communication function (RS232+CAN double RS485) and display screen, with continuous flow of 100A protection plate and copper bar. |
Review assessments at any timeSophisticated monitoring software pro-vides on-demand information for battery health , cell health , BMS protections , reg -ulatory temperature status , and cell bal-ancing leaving peace of mind and confi-dence in your system |